ADVANCED WELDING SYSTEMS FOR AGRU HIGH PURITY PIPING SYSTEMS

AGRU SP Series IR Fusion

FULLY AUTOMATED WELDING OPERATION
All welding parameters are recorded by the computer. By means of a touch-screen, all steps are controlled and sequential.

OPERATOR CONTROL
Use of the machine is controlled by PCMCIA cards which also double as storage discs for downloading or welding data from the computer’s memory. Historical welding information can be recalled at any time and displayed on screen, simplifying traceability.

THE FUSION PROCESS
The computer will control pressure, temperature, heating time and cooling time according to pre-programmed welding parameters which meet the requirements of DVS.

CLAMPING TOOLS
The clamping tools are equipped with a new and unique closing device which ensures uniform and repeatable clamping pressure.

HEATING ELEMENT
The heating element is produced from a special alloy which is controlled and automatically changed to compensate for the smallest temperature changes.

SUITABLE FOR CLEAN ROOM USE
(Class 100 or less)
All surfaces are specially heated and coated to protect against particle generation. Motors and actuators are encapsulated, and guiding devices are free of oil and are fully covered. Records of each weld are printed onto a special thermal printer onto a thermoplastic label which resists IPA.

POWER SUPPLY
Special voltage limiting circuits are included so that the machine is insensitive to spikes. If the voltage is incorrect, it is visible on the touch-screen.

WIDE SIZE RANGE
The SP110 machine welds 20mm to 11mm.
The SP250 machine welds 75mm to 25mm.